SmallRig 2065B 5.5" Articulating Arm
SmallRig 2065B 5.5" Articulating Arm Featuring a ball head at each end, the 5.5" long Articulating Arm from SmallRig can be used to mount a monitor or accessory weighing up to 1.5kg onto your camera rig at almost any angle. Compatible with a wide range of camera components such as a monitor, small lights, or sound gear, the aluminium and steel arm features 1/4"-20 screws on either end. Each screw mount features rubber padding to prevent your equipment from twisting and scratching. Both ball heads and the centre joint are secured using a large locking lever, and each end features a tightening thumbscrew for easy accessory mounting.
SmallRig 2065B 5.5" Articulating Arm Featuring a ball head at each end, the 5.5" long Articulating Arm from SmallRig can be used to mount a monitor or accessory weighing up to 1.5kg onto your camera rig at almost any angle. Compatible with a wide range of camera components such as a monitor, small lights, or sound gear, the aluminium and steel arm features 1/4"-20 screws on either end. Each screw mount features rubber padding to prevent your equipment from twisting and scratching. Both ball heads and the centre joint are secured using a large locking lever, and each end features a tightening thumbscrew for easy accessory mounting.
SmallRig 2065B 5.5" Articulating Arm Featuring a ball head at each end, the 5.5" long Articulating Arm from SmallRig can be used to mount a monitor or accessory weighing up to 1.5kg onto your camera rig at almost any angle. Compatible with a wide range of camera components such as a monitor, small lights, or sound gear, the aluminium and steel arm features 1/4"-20 screws on either end. Each screw mount features rubber padding to prevent your equipment from twisting and scratching. Both ball heads and the centre joint are secured using a large locking lever, and each end features a tightening thumbscrew for easy accessory mounting.
SmallRig 2065B 5.5" Articulating Arm Featuring a ball head at each end, the 5.5" long Articulating Arm from SmallRig can be used to mount a monitor or accessory weighing up to 1.5kg onto your camera rig at almost any angle. Compatible with a wide range of camera components such as a monitor, small lights, or sound gear, the aluminium and steel arm features 1/4"-20 screws on either end. Each screw mount features rubber padding to prevent your equipment from twisting and scratching. Both ball heads and the centre joint are secured using a large locking lever, and each end features a tightening thumbscrew for easy accessory mounting.
in 15 offers
The lowest price for SmallRig 2065B 5.5" Articulating Arm right now is $22.87 at Amazon.com.au, compared across 12 retailers.
The all-time low was $11.00 on 18 Oct 2026 — today's price is 108% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 20 Oct 2026.
Last updated at 20/10/2026 09:09:33
SMALLRIG 5.5" Articulating Magic Arm Monitor Mount with Both 1/4" Screw for LCD Monitor, LED Lights Camera- 2065B
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
SmallRig 2065B 5.5" Articulating Arm
Delivery $4.90
Smallrig Adjustable Friction Power Articulating Magic Arm With 1/4"
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
SmallRig 2065B 5.5" Articulating Arm
SmallRig Articulating Arm (5.5 inches) 2065B
Delivery $9.95
SmallRig Articulating Arm (5.5 inches) 2065B
Delivery $9.95
SmallRig Articulating Arm (5.5 inches) 2065B
Delivery between 23–31 Oct $10
SmallRig Articulating Arm (5.5 inches) 2065B
Delivery between 23–27 Oct $8.95
SmallRig 2065B (5.5'') Articulating Magic Arm
Delivery between 22 Oct – 2 Nov $9.70
SmallRig 2065B Magic Arm (5.5in)
7-day returns
originally posted on bhphotovideo.com
I use this on my a73 with a Small Rig cage to a Feelworld 7 monitor with the Small Rig cage. It seems to hold the monitor with only a slight loosening if I dont tighten the 1/4-20 all the way in to the max on the monitor cage. Happy with the purchase, for the price. I don't think it hurts to have an extra arm with all the stuff that gets attached to todays cameras.
originally posted on bhphotovideo.com
Well made and does exactly what it's supposed to. The single knob loosens both ball joints, which also rotate so you can put the slots where you need them, and the center serrated section. The serrated center section allows it to take a good load without slipping. The single knob also means you have to grab everything in your hand to position it simultaneously, but that's not usually a big deal. It works exactly like some small machine tool indicator holders, if you've seen those- very rigid.
originally posted on bhphotovideo.com
Do not believe that I would re buy this product and not sure it will get much use with my setup. The build is quite good except the plastic rings used to tighten the 1/4 inch stud. They were very hard to tighten and get loose and for that reason I will not use much unless I find a setup to leave them on at all times.
| Dimensions | 5.5 inches |
| Type | Articulating Arm |
| Subtype | Articulating arm |
| Material | stainless steel, Aluminum Alloy |
| Camera Included | No |
SMALLRIG 5.5" Articulating Magic Arm Monitor Mount with Both 1/4" Screw for LCD Monitor, LED Lights Camera- 2065B
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
SmallRig 2065B 5.5" Articulating Arm
Delivery $4.90
Smallrig Adjustable Friction Power Articulating Magic Arm With 1/4"
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
SmallRig 2065B 5.5" Articulating Arm
SmallRig Articulating Arm (5.5 inches) 2065B
Delivery $9.95
I use this on my a73 with a Small Rig cage to a Feelworld 7 monitor with the Small Rig cage. It seems to hold the monitor with only a slight loosening if I dont tighten the 1/4-20 all the way in to the max on the monitor cage. Happy with the purchase, for the price. I don't think it hurts to have an extra arm with all the stuff that gets attached to todays cameras.
Well made and does exactly what it's supposed to. The single knob loosens both ball joints, which also rotate so you can put the slots where you need them, and the center serrated section. The serrated center section allows it to take a good load without slipping. The single knob also means you have to grab everything in your hand to position it simultaneously, but that's not usually a big deal. It works exactly like some small machine tool indicator holders, if you've seen those- very rigid.
Do not believe that I would re buy this product and not sure it will get much use with my setup. The build is quite good except the plastic rings used to tighten the 1/4 inch stud. They were very hard to tighten and get loose and for that reason I will not use much unless I find a setup to leave them on at all times.
I recently used this arm and also the SmallRig Universal Magic Arm with Dual Ball Heads for streaming basketball games. I had Marshall CV346's mounted on the backboard support with magnetic mounts. They didn't budge when the support got crashed into by players. I will also be using these mounts on the backstop for baseball season.
It gets the job done. Annoyingly.The ball heads don't lock when the arm is locked. I'm not sure if it's a manufacturing defect, and it's not unscrewing. The ball heads simply don't lock down. I'm using a SmallHD 5 inch monitor, so I'm well below the 3.3 lb weight limit. There's definitely better products out there.
It's not lightweight but certainly does the job and has replaced the similar, but frankly useless, knuckle joint that my monitor has been attached to for the last few years. Another excellent piece of Small Rig kit.
The SmallRig Articulating arm is exactly what I needed to mount my camera where I needed it. Combining this with a super clamp is a perfect combo.You can mount your camera or other equipment where you want it. Highly recommend for anyone that's not able to find mounting kit or if you dont want to spend a whole lot on a tripod.
Paired this with an arca-swiss plate to mount accessories to my L-Bracket. Does exactly what I need and I trust mounting a variety of items with it.
Cant complain with this little unit. Does what it’s supposed to and hold the weight of the Ninja V with a big battery and add with no deviance from then the torqued position that is set. I probably should have bought the longer version for my handheld canon r6 stage rig but does its purpose and does it very well. Highly recommend small rig products.
| Dimensions | 5.5 inches |
| Type | Articulating Arm |
| Subtype | Articulating arm |
| Material | stainless steel, Aluminum Alloy |
| Camera Included | No |
