TP-Link TL-SG2210P 8-Port Gigabit Smart PoE Switch

The item is perfect. I like it very much. Please buy items in this shop. Thank you seller. Thank you shopee. Thank you delivery rider.

Thank you for creating something that doesn't normally exist for these types of products! It's much better than just placing the switch on a normal universal 1U shelf. Keep up the good work 👍

Performance:100%Product Quality:100%Best Feature:100%A little dent on the box. But unit is all good. Kudos to the seller for the great chat support. Recommended seller!

After months of assuming we had a bad PoE camera (professional grade Hikvision), we finally swapp...

After months of assuming we had a bad PoE camera (professional grade Hikvision), we finally swapped it for a new one. The issue we were having, of intermittent connection loss, still continues. I had tried a different port, as well as testing the CAT6 cable that I crimped myself from a commercial spool. The old/new cameras and cable are all perfect. Turns out it is the switch. I am not quite sure what is causing it to malfunction-it may have not even been noticeable with basic switch functionality or possibly other PoE devices... it is definitely noticeable with a live PoE camera that constantly loses signal (intermittently). I should have checked my main Cisco enterprise switch log and would have seen this: Jun 18 17:54:08.325: %LINEPROTO-5-UPDOWN: Line protocol on ... MoreAfter months of assuming we had a bad PoE camera (professional grade Hikvision), we finally swapped it for a new one. The issue we were having, of intermittent connection loss, still continues. I had tried a different port, as well as testing the CAT6 cable that I crimped myself from a commercial spool. The old/new cameras and cable are all perfect. Turns out it is the switch. I am not quite sure what is causing it to malfunction-it may have not even been noticeable with basic switch functionality or possibly other PoE devices... it is definitely noticeable with a live PoE camera that constantly loses signal (intermittently). I should have checked my main Cisco enterprise switch log and would have seen this: Jun 18 17:54:08.325: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/42, changed state to up Jun 18 17:54:41.979: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/42, changed state to down Jun 18 17:54:42.977: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/42, changed state to down Jun 18 17:54:45.812: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/42, changed state to up Jun 18 17:54:46.819: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/42, changed state to up Jun 18 17:54:55.383: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/42, changed state to down Jun 18 17:54:56.381: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/42, changed state to down Jun 18 17:55:02.849: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/42, changed state to up Jun 18 17:55:03.855: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/42, changed state to up Jun 18 17:55:14.164: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/42, changed state to down Jun 18 17:55:15.163: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/42, changed state to down Jun 18 17:55:17.528: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/42, changed state to up Jun 18 17:55:18.535: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/42, changed state to up As can be seen from the above, the link is constantly going down and back up again. Shame on me for not looking at the log before swapping out the camera. There is only 1 device connected to this switch, the PoE camera. I wouldn't recommend this switch for professionals. If you are an amateur and don't really care if it works.. might be a good solution. Stick with the brands that represent quality .. Cisco/Netgear/Linksys/etc.

Let's set the record straight. The latest POE version for the United States is 1.0, and it works ...

Let's set the record straight. The latest POE version for the United States is 1.0, and it works perfectly with the latest software controller. The latest "NON" POE version is 3.0. Please make sure you are reviewing the correct product. Contrary to several reviews, v1 of the POE switch is NOT end of life. I have 2 of the POE US models, both version 1, and they adopted and work just fine. No connection issues, and no issues with the software controller. My new Omada system works better than my Unifi system did, and costs nearly half as much. I highly recommend the Omada SDN setup.

So far so good, it's not a bottle neck of data transfer with gigabit speeds 10/100/1000, and half...

So far so good, it's not a bottle neck of data transfer with gigabit speeds 10/100/1000, and half of the 16 ports (8) are POE. Technically it's a 15 port switch since 1 port is required to transfer datst with the router. So far I'm running 5 devices POE and it has no issue powering them, not even at night when the IR LEDs kick on. I'm going to be adding a WiFi access point that is POE, and possibly running 2 WiFi cameras from this POE using all 8 POE ports to see if it has the wattage to run everything. BONUS it pays for itself from the savings ~$40 for each POE injector! WARNING this isn't a router or modem or WiFi access point! You'll need a modem to get your internet signal, some modems have a couple of ports and WiFi, but I don't like devices that claim to do ... MoreSo far so good, it's not a bottle neck of data transfer with gigabit speeds 10/100/1000, and half of the 16 ports (8) are POE. Technically it's a 15 port switch since 1 port is required to transfer datst with the router. So far I'm running 5 devices POE and it has no issue powering them, not even at night when the IR LEDs kick on. I'm going to be adding a WiFi access point that is POE, and possibly running 2 WiFi cameras from this POE using all 8 POE ports to see if it has the wattage to run everything. BONUS it pays for itself from the savings ~$40 for each POE injector! WARNING this isn't a router or modem or WiFi access point! You'll need a modem to get your internet signal, some modems have a couple of ports and WiFi, but I don't like devices that claim to do everything, multitasking devices typically suck! You'll need a router to direct internet traffic to the correct device, but they usually only have ~4 ports, some have WiFi antennas for an access point, but I don't like them because the best location for your router is not typically the best location for WiFi coverage. You should get a secondary WiFi access point that is dedicated to that job, it will give better connection speeds, and you can locate it in the best stop for covering your home and property (I can move my lawn and snowblow the sidewalk without losing connection). However your WiFi is going to slow down if you try to run everything wirelessly. So you'll want a good switch to hard wire anything you can. Desktop computers, printers, digital storage, game consoles, security cameras, WiFi access point, smart home controller. You'll get less WiFi interference, and better security if devices aren't WiFi connected with the default password for any drive-by hacker to steal, or neighbor to leach off your internet.

This is a great little POE switch that provides Power Over Ethernet to ports 1-4. However upon re...

This is a great little POE switch that provides Power Over Ethernet to ports 1-4. However upon receiving the switch I adopted it into my network and updated the firmware and everything seemed fine, so I took my other devices and plugged them into ports 5-7 (8 being the uplink to the LAN port on the TL-R605). When I started running speed tests the upload test on speedtest.net was freezing up and bogging down my whole network. I switched everything that was plugged into ports 5-7 back into the LAN ports of the TL-R605 and my speedtests went back to normal. At first, I thought it might be a hardware issue so I started a replacement return through Home Essentials Direct. I woke up the next morning after being up all night trying to figure it out, and it dawned on me to ... MoreThis is a great little POE switch that provides Power Over Ethernet to ports 1-4. However upon receiving the switch I adopted it into my network and updated the firmware and everything seemed fine, so I took my other devices and plugged them into ports 5-7 (8 being the uplink to the LAN port on the TL-R605). When I started running speed tests the upload test on speedtest.net was freezing up and bogging down my whole network. I switched everything that was plugged into ports 5-7 back into the LAN ports of the TL-R605 and my speedtests went back to normal. At first, I thought it might be a hardware issue so I started a replacement return through Home Essentials Direct. I woke up the next morning after being up all night trying to figure it out, and it dawned on me to just go ahead and revert the firmware back down to 1.0.0 and so I did. I then plugged everything back into the POE switch (TL-SG2008P) and boom the speedtests ran just fine as if I was plugged into the LAN ports on the R605. If you do purchase this switch, or are having issues with upload connectivity on your 1Gbps connection try reverting the firmware back to 1.0.0 until they come out with a fix.