Kreg Accu-Cut XL Saw Guide
Transform your circular saw into a high-performance track-guided cutting tool for breaking down full sheets of plywood. Get perfectly straight, accurate cuts every time with track-guided cutting. Break down panels and plywood easily and quickly with cutting capacity up to 2500mm. Splinter-free cuts with tearout protection from anti-chip guide strips. Make the cuts you need – anywhere – by taking your saw to the workpiece instead of bringing the workpiece to a fixed saw location. Easily attaches to and detaches from to your left-blade or right-blade circular saw. No clamps needed thanks to anti-slip guide strips that keep the track in place through the entire cut.
Transform your circular saw into a high-performance track-guided cutting tool for breaking down full sheets of plywood. Get perfectly straight, accurate cuts every time with track-guided cutting. Break down panels and plywood easily and quickly with cutting capacity up to 2500mm. Splinter-free cuts with tearout protection from anti-chip guide strips. Make the cuts you need – anywhere – by taking your saw to the workpiece instead of bringing the workpiece to a fixed saw location. Easily attaches to and detaches from to your left-blade or right-blade circular saw. No clamps needed thanks to anti-slip guide strips that keep the track in place through the entire cut.
Transform your circular saw into a high-performance track-guided cutting tool for breaking down full sheets of plywood. Get perfectly straight, accurate cuts every time with track-guided cutting. Break down panels and plywood easily and quickly with cutting capacity up to 2500mm. Splinter-free cuts with tearout protection from anti-chip guide strips. Make the cuts you need – anywhere – by taking your saw to the workpiece instead of bringing the workpiece to a fixed saw location. Easily attaches to and detaches from to your left-blade or right-blade circular saw. No clamps needed thanks to anti-slip guide strips that keep the track in place through the entire cut.
Transform your circular saw into a high-performance track-guided cutting tool for breaking down full sheets of plywood. Get perfectly straight, accurate cuts every time with track-guided cutting. Break down panels and plywood easily and quickly with cutting capacity up to 2500mm. Splinter-free cuts with tearout protection from anti-chip guide strips. Make the cuts you need – anywhere – by taking your saw to the workpiece instead of bringing the workpiece to a fixed saw location. Easily attaches to and detaches from to your left-blade or right-blade circular saw. No clamps needed thanks to anti-slip guide strips that keep the track in place through the entire cut.
in 10 offers
The lowest price for Kreg Accu-Cut XL Saw Guide right now is $174.82 at eBay.com.au, compared across 9 retailers.
The all-time low was $98.99 on 19 Dec 2023 — today's price is 77% above the lowest ever. It has been notably cheaper before — worth setting a price alert.
Prices last updated 9 Sept 2026.
Last updated at 09/09/2026 07:41:13
Kreg KMA3700 Accu-Cut XL - Universal Track Saw Guide System - Make Straight, Cross, Rip & Angled Cuts Easily - Holiday Home Improvement Gifts for Him
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Kreg 48 In. Accu Cut Aluminum Circular Saw Track Straight Incredible
Delivery $190.77
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Kreg Accu-cut Xl Saw Guide
Delivery $13.20
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
KREG Accu-Cut XL Rail Saw Guide KR-KMA3700
Free delivery between 16–21 Sept
Kreg Accu-Cut XL Saw Guide
Delivery between 14–21 Sept $10
Kreg Accu-Cut Xl Circular Saw Track Guide System - KR-KMA3700 - Tool Kit Depot
Free delivery
Kreg KR-KMA3700 Accu-Cut XL Saw Guide
Free delivery
Kreg KMA3700 Accu-Cut XL - Universal Track Saw Guide System - Make Straight, Cross, Rip & Angled Cuts Easily
Delivery $27.67
Kreg Sliding Circular Saw Ruler AccuCut XL 100 inches
Delivery between 13–17 Sept $35.88
KMA3700 Accu-Cut XL - Universal Track Saw Guide System - Make Straight, Cross, Rip & Angled Cuts Easily
Delivery between 15–18 Sept $29
originally posted on kregtool.com
I'm a self employed general contractor, and I bought the Accu Cut XL so that I would not have to keep my Festool track saw in my work van any longer. The Accu Cut XL works great for breaking down sheet goods on the jobsite in locations where setting up my table saw is inconvenient. I even use it with a Milwaukee M18 6.5" circular saw to trim rake wall roof decking and eave roof decking overhangs. I would highly recommend it for these uses.
originally posted on kregtool.com
If you're looking for a budget track saw, this is a great solution. The price is right for the quality of the results. The cuts are straight, accurate, and clean. I couldn't get these results with a circular saw jig that I made. Now for the things I would change if I could. I do wish that setup was easier. You need to take the time to connect the pieces and verify the pieces are straight with a straight edge. It would be nice to have 2 50" tracks instead of 4 pieces. It would be nice if sled saw clamp was sturdier. I have a Dewalt circular saw with a raise lip on the base plate and the clamp seems a bit flimsy and finicky to clamp down. I wish the tolerances between the circular saw adapter and the track was better. There is some play in the track, maybe 1/16". I ... MoreIf you're looking for a budget track saw, this is a great solution. The price is right for the quality of the results. The cuts are straight, accurate, and clean. I couldn't get these results with a circular saw jig that I made. Now for the things I would change if I could. I do wish that setup was easier. You need to take the time to connect the pieces and verify the pieces are straight with a straight edge. It would be nice to have 2 50" tracks instead of 4 pieces. It would be nice if sled saw clamp was sturdier. I have a Dewalt circular saw with a raise lip on the base plate and the clamp seems a bit flimsy and finicky to clamp down. I wish the tolerances between the circular saw adapter and the track was better. There is some play in the track, maybe 1/16". I added some UHMW tape to the edge of the guides on the saw adapter remove the slop. The anti-slip strips work great for most materials. If your material is smooth like prefinished plywood, you'll need the track clamps to make sure it doesn't slip. That being said, the results are fantastic once you take the time to setup properly.
originally posted on kregtool.com
Pros:Light WeightCuts Semi Straight linesEasy on/off of the saw sledStarter plate makes it easy to start without having a plunge sawThe set screws are all Philips and not allen wrench so you can use a #1 phillips driverSaw sled is easy to put on and off once assembled. This one part uses a #2 phillips, not a #1.The saw sled will mount to just about any circular saw.Cons:Saw guard is always up because of the saw sled - don't set this tool on your work surface - you will damage itSaw sled is held on with plastic pieces that are under considerable torque in order to hold the saw squarethe track is loose so if you are not constantly holding sideways pressure with your off hand - the cut will vary upwards of 3/32 of an inch. So if you rip a sheet in half the ... MorePros:Light WeightCuts Semi Straight linesEasy on/off of the saw sledStarter plate makes it easy to start without having a plunge sawThe set screws are all Philips and not allen wrench so you can use a #1 phillips driverSaw sled is easy to put on and off once assembled. This one part uses a #2 phillips, not a #1.The saw sled will mount to just about any circular saw.Cons:Saw guard is always up because of the saw sled - don't set this tool on your work surface - you will damage itSaw sled is held on with plastic pieces that are under considerable torque in order to hold the saw squarethe track is loose so if you are not constantly holding sideways pressure with your off hand - the cut will vary upwards of 3/32 of an inch. So if you rip a sheet in half the two ends could be as much as 3/16 off. This transfers to poor cutsThe short pieces are too small so you either have to always keep at least two pieces together or constantly assemble/disassemble.If you leave two tracks together for basic everyday use, the pieces are under constant stress and the cut line becomes no longer straight.The set screws are #1 phillips which makes them easy to strip. Most people don't carry a #1 phillips driver - but better than allen wrenchThere needs to be a #1 driver included wth the set and a place to store it on the saw sled to make it more convenient for assembly and dis assemblyOverall, for the cost of this product I find it is a disappointment. I have a friend who has the $400 corded plunge saw and guide. That product is almost flawless. I had hoped this product would be of better quality but it is not much better than the cheaper $50 kit at the local lumber store.
| Product dimensions | 71.12 x 20.32 x 9.86 cm; 4.99 Kilograms |
| Is Discontinued By Manufacturer | No |
| Power Source | Hand Powered |
| Measurement System | Metric |
Kreg KMA3700 Accu-Cut XL - Universal Track Saw Guide System - Make Straight, Cross, Rip & Angled Cuts Easily - Holiday Home Improvement Gifts for Him
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Kreg 48 In. Accu Cut Aluminum Circular Saw Track Straight Incredible
Delivery $190.77
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Kreg Accu-cut Xl Saw Guide
Delivery $13.20
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
KREG Accu-Cut XL Rail Saw Guide KR-KMA3700
Free delivery between 16–21 Sept
Kreg Accu-Cut XL Saw Guide
Delivery between 14–21 Sept $10
I'm a self employed general contractor, and I bought the Accu Cut XL so that I would not have to keep my Festool track saw in my work van any longer. The Accu Cut XL works great for breaking down sheet goods on the jobsite in locations where setting up my table saw is inconvenient. I even use it with a Milwaukee M18 6.5" circular saw to trim rake wall roof decking and eave roof decking overhangs. I would highly recommend it for these uses.
If you're looking for a budget track saw, this is a great solution. The price is right for the quality of the results. The cuts are straight, accurate, and clean. I couldn't get these results with a circular saw jig that I made. Now for the things I would change if I could. I do wish that setup was easier. You need to take the time to connect the pieces and verify the pieces are straight with a straight edge. It would be nice to have 2 50" tracks instead of 4 pieces. It would be nice if sled saw clamp was sturdier. I have a Dewalt circular saw with a raise lip on the base plate and the clamp seems a bit flimsy and finicky to clamp down. I wish the tolerances between the circular saw adapter and the track was better. There is some play in the track, maybe 1/16". I ... MoreIf you're looking for a budget track saw, this is a great solution. The price is right for the quality of the results. The cuts are straight, accurate, and clean. I couldn't get these results with a circular saw jig that I made. Now for the things I would change if I could. I do wish that setup was easier. You need to take the time to connect the pieces and verify the pieces are straight with a straight edge. It would be nice to have 2 50" tracks instead of 4 pieces. It would be nice if sled saw clamp was sturdier. I have a Dewalt circular saw with a raise lip on the base plate and the clamp seems a bit flimsy and finicky to clamp down. I wish the tolerances between the circular saw adapter and the track was better. There is some play in the track, maybe 1/16". I added some UHMW tape to the edge of the guides on the saw adapter remove the slop. The anti-slip strips work great for most materials. If your material is smooth like prefinished plywood, you'll need the track clamps to make sure it doesn't slip. That being said, the results are fantastic once you take the time to setup properly.
Pros:Light WeightCuts Semi Straight linesEasy on/off of the saw sledStarter plate makes it easy to start without having a plunge sawThe set screws are all Philips and not allen wrench so you can use a #1 phillips driverSaw sled is easy to put on and off once assembled. This one part uses a #2 phillips, not a #1.The saw sled will mount to just about any circular saw.Cons:Saw guard is always up because of the saw sled - don't set this tool on your work surface - you will damage itSaw sled is held on with plastic pieces that are under considerable torque in order to hold the saw squarethe track is loose so if you are not constantly holding sideways pressure with your off hand - the cut will vary upwards of 3/32 of an inch. So if you rip a sheet in half the ... MorePros:Light WeightCuts Semi Straight linesEasy on/off of the saw sledStarter plate makes it easy to start without having a plunge sawThe set screws are all Philips and not allen wrench so you can use a #1 phillips driverSaw sled is easy to put on and off once assembled. This one part uses a #2 phillips, not a #1.The saw sled will mount to just about any circular saw.Cons:Saw guard is always up because of the saw sled - don't set this tool on your work surface - you will damage itSaw sled is held on with plastic pieces that are under considerable torque in order to hold the saw squarethe track is loose so if you are not constantly holding sideways pressure with your off hand - the cut will vary upwards of 3/32 of an inch. So if you rip a sheet in half the two ends could be as much as 3/16 off. This transfers to poor cutsThe short pieces are too small so you either have to always keep at least two pieces together or constantly assemble/disassemble.If you leave two tracks together for basic everyday use, the pieces are under constant stress and the cut line becomes no longer straight.The set screws are #1 phillips which makes them easy to strip. Most people don't carry a #1 phillips driver - but better than allen wrenchThere needs to be a #1 driver included wth the set and a place to store it on the saw sled to make it more convenient for assembly and dis assemblyOverall, for the cost of this product I find it is a disappointment. I have a friend who has the $400 corded plunge saw and guide. That product is almost flawless. I had hoped this product would be of better quality but it is not much better than the cheaper $50 kit at the local lumber store.
It's better than free handing it, that's for sure. But it's also fairly fragile; I ended up gouging the plastic guide track within the first week when I backed out a spinning saw an inch without thinking. And while I love the length to be able to rip 4x8 sheet, I'm having to re-secure the end piece almost every thing. Nothing wrong with plastic, but I feel like a little more metal in the whole rig might be worthwhile.
I bought the Accu-cut XL, I am not impressed! There is to much movement between the track and the sled, yes you can make it work by forcing the sled to one side, it is nice that once you set it up and cut the glue strip you can set it right on your pencil mark and make the cut. After making several cuts I realized what was going on with the movement between the sled and the track, you have to put pressure, not a lot of pressure to keep it from walking off the line. So I cut them slightly larger and run them across my table saw. Kind of sorry I bought it..
I’ve used the Accu-cut XL a few times now, mainly to make long cuts in plywood sheets that are too unwieldy to handle on my table saw set up. The initial trim of the zero-clearance strips was messy…I had blue shavings on everything, but to be fair I got it cleaned up after a bit. Then when I used the Accu-cut, I got a little more. The sled mount is not very robust, and the sled flexes easily. There is more play between the saw sled and the track than I realized, so a slight twist of the saw can “trim” more off the strip. There is definitely a learning curve. The saw must be mounted carefully, and pressure applied to the saw must be kept very balanced, being careful to not slightly twist or tilt while maintaining a light but not too heavy downward pressure. This is ... MoreI’ve used the Accu-cut XL a few times now, mainly to make long cuts in plywood sheets that are too unwieldy to handle on my table saw set up. The initial trim of the zero-clearance strips was messy…I had blue shavings on everything, but to be fair I got it cleaned up after a bit. Then when I used the Accu-cut, I got a little more. The sled mount is not very robust, and the sled flexes easily. There is more play between the saw sled and the track than I realized, so a slight twist of the saw can “trim” more off the strip. There is definitely a learning curve. The saw must be mounted carefully, and pressure applied to the saw must be kept very balanced, being careful to not slightly twist or tilt while maintaining a light but not too heavy downward pressure. This is not too difficult if you are ripping lightweight panels 12” from one edge. However, ripping 3/4” plywood down the middle requires a stronger push and farther reach, a combination I found challenging when using the Accu-cut. My technique is improving, but the zero-clearance strips show the wear and tear of my learning curve. They’ll have to be replaced sooner than I had hoped. I’d like to see the sled a bit more robust, with a more secure attachment to the saw. Bottom line is it does do the job, but there is more of a learning curve than might be expected.
For the price the Accucut is a very good product. My only complaint is the machining could be a bit better. The sled could fit a little better on the track and I had one track piece that was not even close to a good fit but Kreg shipped out a whole new kit rather than a track extension. Great customer service! Also the edge pieces don’t fit end to end. They leave a small gap which the directions say not to do. Leave a little short on each end of the extensions for no gap in the middle BUT if you attach two into an 8 foot track there will be a gap. All in all a good product for the price but it could have been great with just a little more care for tolerances.
Be patient with the setup if you want goods results. I would suggest doing the setup long before you need it for a project. As for my experience, I had to shim under the arms that hold the saw to the guide to accomodate my thicker saw plate. Aligning the tracks was simple. Would have preferred to have set screws that tighten with allen key. The phillips style is too easy to strip even with the right tip. You have to trim the guide strips with your saw to get an edge you can use to setup your cuts. The strips are a soft plastic (vinyl?) and when you do the step to trim them it makes an awful mess of statically charged plastics chips/dust. Cleaning up the mess was most of the set up for me. The edges of some of the plastic parts are quite sharp, especially the end cap ... MoreBe patient with the setup if you want goods results. I would suggest doing the setup long before you need it for a project. As for my experience, I had to shim under the arms that hold the saw to the guide to accomodate my thicker saw plate. Aligning the tracks was simple. Would have preferred to have set screws that tighten with allen key. The phillips style is too easy to strip even with the right tip. You have to trim the guide strips with your saw to get an edge you can use to setup your cuts. The strips are a soft plastic (vinyl?) and when you do the step to trim them it makes an awful mess of statically charged plastics chips/dust. Cleaning up the mess was most of the set up for me. The edges of some of the plastic parts are quite sharp, especially the end cap of the tracks. As for how it works, it does the task it is intended to do. Cut quality will still depend on user ability and condition of your saw and blade. So going forward it will do what I need it to. I am just disappointed in some of the design details.
| Product dimensions | 71.12 x 20.32 x 9.86 cm; 4.99 Kilograms |
| Is Discontinued By Manufacturer | No |
| Power Source | Hand Powered |
| Measurement System | Metric |
