Get Precise Results with the GearWrench 85061 Drive Torque Wrench The Stanley-Proto J6168F Multicolor Drive Dial Torque Wrench tightens your bolt to a tee. This unit has an accuracy rating of +/- 3% from 20% in the clockwise direction and to 100% of full scale. With a thin profile and a sealed tear drop head offers easy access to tight spots. Make easy quick torque adjustments with the pull adjustment collar. The stamped scale is easy-to-read and instantly visible. With a knurled anodized aluminum handle, you always have a comfortable grip.
Get Precise Results with the GearWrench 85061 Drive Torque Wrench The Stanley-Proto J6168F Multicolor Drive Dial Torque Wrench tightens your bolt to a tee. This unit has an accuracy rating of +/- 3% from 20% in the clockwise direction and to 100% of full scale. With a thin profile and a sealed tear drop head offers easy access to tight spots. Make easy quick torque adjustments with the pull adjustment collar. The stamped scale is easy-to-read and instantly visible. With a knurled anodized aluminum handle, you always have a comfortable grip.
in 3 offers
last seen 9 June 2026
The lowest price we last saw for GearWrench 30-250 in/lbs 3/8" Dr Micrometer Torque Wrench 85061 was $237.88 at Southland Supply Group, compared across 3 retailers (last seen 9 June 2026). Prices may have changed since.
The all-time low we recorded was $219.00 on 16 Jan 2025.
Prices last updated 9 June 2026.
GearWrench 30-250 in/lbs 3/8" Dr Micrometer Torque Wrench 85061
Get Precise Results with the GearWrench 85061 Drive Torque Wrench The Stanley-Proto J6168F Multicolor Drive Dial Torque Wrench tightens your bolt to a tee. This unit has an accuracy rating of +/- 3% from 20% in the clockwise direction and to 100% of full scale. With a thin profile and a sealed tear drop head offers easy access to tight spots. Make easy quick torque adjustments with the pull adjustment collar. The stamped scale is easy-to-read and instantly visible. With a knurled anodized aluminum handle, you always have a comfortable grip.
Get Precise Results with the GearWrench 85061 Drive Torque Wrench The Stanley-Proto J6168F Multicolor Drive Dial Torque Wrench tightens your bolt to a tee. This unit has an accuracy rating of +/- 3% from 20% in the clockwise direction and to 100% of full scale. With a thin profile and a sealed tear drop head offers easy access to tight spots. Make easy quick torque adjustments with the pull adjustment collar. The stamped scale is easy-to-read and instantly visible. With a knurled anodized aluminum handle, you always have a comfortable grip.
Last updated at 09/06/2026 14:41:23
GearWrench 85061M 3/8" Drive Micrometer Torque Wrench 30-250 in/lbs.
Delivery $22
3/8" Dr Micrometer Torque Wrench 30-250 in/lbs
Delivery $16.44
GEARWRENCH 3/8" Drive Micrometer Torque Wrench 30-250 in/lbs. - 85061
Delivery between 15–18 June $29
originally posted on homeessentialsdirect.com
Great price for a quality torque wrench. My son, a mechanic, states the wrench is a solid build, easy to use, should last many years.
originally posted on homeessentialsdirect.com
Great tool for the money. I use this torque wrench almost daily and haven't had any issues.
originally posted on homeessentialsdirect.com
If you’re an automotive technician I highly recommend this torque wrench. I havent had any issues with it or the vehicles worked on with this. Much cheaper than the tool trucks and just as good. Have techs in the shop ask me to borrow it all the time especially due to the counter clockwise torquing ability as well. Another cool feature is the ft-lbs on front and NM on the back side so you dont have to be running to the computer or checking your phones internet for the conversion. Also comes with a certificate of calibration so you know right out of the box its ready to go to work.
| Overall Length | 35.56 cm / 14 in |
| Drive Tang Size | 3/8 in |
| Head Thickness | 1.8288 cm / 0.720 in |
| Head Width | 3.55 cm / 1.40 in |
| Alt Scale Increments | 0.23 nm |
GearWrench 85061M 3/8" Drive Micrometer Torque Wrench 30-250 in/lbs.
Delivery $22
3/8" Dr Micrometer Torque Wrench 30-250 in/lbs
Delivery $16.44
GEARWRENCH 3/8" Drive Micrometer Torque Wrench 30-250 in/lbs. - 85061
Delivery between 15–18 June $29
Great price for a quality torque wrench. My son, a mechanic, states the wrench is a solid build, easy to use, should last many years.
Great tool for the money. I use this torque wrench almost daily and haven't had any issues.
If you’re an automotive technician I highly recommend this torque wrench. I havent had any issues with it or the vehicles worked on with this. Much cheaper than the tool trucks and just as good. Have techs in the shop ask me to borrow it all the time especially due to the counter clockwise torquing ability as well. Another cool feature is the ft-lbs on front and NM on the back side so you dont have to be running to the computer or checking your phones internet for the conversion. Also comes with a certificate of calibration so you know right out of the box its ready to go to work.
It is as good as the higher priced torque wrenches I have used in the factory where I work as quality control. I am pleased with the accuracy and ease of setting the torque wrench.
Ratchet head has slop when in use. It gets the job done, however not recommended for daily heavy use.
There are cheaper torque wrenches, and more expensive. I got this for peace of mind to trust the tool. It does have good positive click, and accurate per my hillbilly test:A 3/8 bolt has typical torque value of 15 ft lb (180 inch / lb) not lubricated.I used a trusted CDI torque wrench (made by Snap On) at lower end of its 100-750 inch lb range and torqued to 150 inch lb.I used the Gear Wrench to torque at same and the fastener did not move. I set this Gear Wrench to 160 inch lb and it moved the nut slightly then clicked. I went back and forth, each wrench confirming the other as I worked up to 200 inch lb.Although I had a good 3/8 drive 100-750 inch lb torque wrench, I wanted this 30-250 inch lb wrench for smaller fasteners and so each wrench could operate ... MoreThere are cheaper torque wrenches, and more expensive. I got this for peace of mind to trust the tool. It does have good positive click, and accurate per my hillbilly test:A 3/8 bolt has typical torque value of 15 ft lb (180 inch / lb) not lubricated.I used a trusted CDI torque wrench (made by Snap On) at lower end of its 100-750 inch lb range and torqued to 150 inch lb.I used the Gear Wrench to torque at same and the fastener did not move. I set this Gear Wrench to 160 inch lb and it moved the nut slightly then clicked. I went back and forth, each wrench confirming the other as I worked up to 200 inch lb.Although I had a good 3/8 drive 100-750 inch lb torque wrench, I wanted this 30-250 inch lb wrench for smaller fasteners and so each wrench could operate closer to the sweet spot mid-range rather than at lowest setting on my other torque wrenches. I can recommend this 30-250 inch lb one, the CDI 100-750 inch lb, and for the bigger stuff like lug nuts I trust the more affordable TEKTON 1/2 Inch Drive Click Torque Wrench (10-150 ft.-lb.) because I am not so concerned about stripping out a sensitive fastener in an aluminum motorcycle engine. It is more for lug nuts and a motorcycle axle fastener.
Very good quality and finish on this torque wrench. I've heard of many in/lb torque wrenches out there that don't have a solid click sound and feel when torque is reached. I can tell you that even at the lowest 30 in/lb, the click and feel is very noticeable. The chrome is very nice and the knurled handle feels very stout and reassuring in the hand. There is no plastic anywhere to be found and I prefer this locking ring type of lock than the screw type at the bottom. All in all I recommend this to anyone who's looking for a mid-range pro grade torque wrench.
Very nicely made, but it is Made in China. My older KD torque wrench is a better quality Made in USA.
Works smoothly, very accurate. Used to torque engine valve cover bolts. Click is easily heard and felt. Great Grip and weight!
great torque wrench,have had some of the best,this one works just as well as the big brands,dont be fooled,it might be made in chine,but its built well and is pretty good quality
| Overall Length | 35.56 cm / 14 in |
| Drive Tang Size | 3/8 in |
| Head Thickness | 1.8288 cm / 0.720 in |
| Head Width | 3.55 cm / 1.40 in |
| Alt Scale Increments | 0.23 nm |
