Currently, the H2 Dual-Nozzle function only supports nozzles of the same size.2. Compatible with both left and right hotends on H2D.3. On H2C, this hotend is supported only on the Left (Lifting) Hotend. The larger your model, the more time you save—especially for prints with extensive infills. Tested with ABS, Ø240mm single-wall cylinder, 0.2mm layer height, 1.0mm outer wall, 280°C nozzle temperature, spiral vase mode on.2. Tested with PLA Basic, 15% infill, 300x300x300mm cube. Learn more about filament compatibility on Bambu Lab Wiki.
Currently, the H2 Dual-Nozzle function only supports nozzles of the same size.2. Compatible with both left and right hotends on H2D.3. On H2C, this hotend is supported only on the Left (Lifting) Hotend. The larger your model, the more time you save—especially for prints with extensive infills. Tested with ABS, Ø240mm single-wall cylinder, 0.2mm layer height, 1.0mm outer wall, 280°C nozzle temperature, spiral vase mode on.2. Tested with PLA Basic, 15% infill, 300x300x300mm cube. Learn more about filament compatibility on Bambu Lab Wiki.
Bambu Lab High Flow Hotend with hardened steel nozzle 0.4mm [Fah063]
Currently, the H2 Dual-Nozzle function only supports nozzles of the same size.2. Compatible with both left and right hotends on H2D.3. On H2C, this hotend is supported only on the Left (Lifting) Hotend. The larger your model, the more time you save—especially for prints with extensive infills. Tested with ABS, Ø240mm single-wall cylinder, 0.2mm layer height, 1.0mm outer wall, 280°C nozzle temperature, spiral vase mode on.2. Tested with PLA Basic, 15% infill, 300x300x300mm cube. Learn more about filament compatibility on Bambu Lab Wiki.
Currently, the H2 Dual-Nozzle function only supports nozzles of the same size.2. Compatible with both left and right hotends on H2D.3. On H2C, this hotend is supported only on the Left (Lifting) Hotend. The larger your model, the more time you save—especially for prints with extensive infills. Tested with ABS, Ø240mm single-wall cylinder, 0.2mm layer height, 1.0mm outer wall, 280°C nozzle temperature, spiral vase mode on.2. Tested with PLA Basic, 15% infill, 300x300x300mm cube. Learn more about filament compatibility on Bambu Lab Wiki.
in 7 offers
The lowest price for Bambu Lab High Flow Hotend with hardened steel nozzle 0.4mm [Fah063] right now is $25.29 at eBay.com.au, compared across 5 retailers.
The all-time low was $25.29 on 2 Nov 2026. That's the lowest price we've ever tracked — a great time to buy.
Prices last updated 3 Nov 2026.
Last updated at 03/11/2026 06:33:02
3d Printer For Bambu Lab P2s H2d High Flow Hotend Kit Nozzle 0.4mm
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Bambu Hotend - X2D / P2S / H2C (Left) /H2S / H2D | Bambu Lab Spares X2D / P2S / H2C (Left) / H2S / H2D / 0.4mm High Flow Hardened Steel
Bambu Lab Accessories High Flow Hotend with hardened steel nozzle - 0.4 mm For Printer P2S
Delivery between 8–13 Nov $9
Bambu Lab High Flow Hotend — H2D / H2S / H2C (left) / P2S / X2D — 0.4mm Hardened Steel
Delivery between 5–11 Nov $12.95
Bambu Lab H2D/H2S/P2S High Flow Hotend, 0.4mm [FAH063]
Delivery $15
| Flow Rate | 48 mm/s (PLA Matte) |
| Primary Function | Reducing print time, Enables significantly increased volumetric speed |
| Material | Hardened Steel (Nozzle) |
| Intended Use | Accelerate prints, Accelerate prints with optimized melt flow, Achieve crisp edges and flawless details |
| Solution For | Reducing print time |
3d Printer For Bambu Lab P2s H2d High Flow Hotend Kit Nozzle 0.4mm
Free delivery
Affiliate Disclosure: We may receive a small commission for purchases made through this link at no extra cost to you. This helps support our site. Thank you!
Bambu Hotend - X2D / P2S / H2C (Left) /H2S / H2D | Bambu Lab Spares X2D / P2S / H2C (Left) / H2S / H2D / 0.4mm High Flow Hardened Steel
Bambu Lab Accessories High Flow Hotend with hardened steel nozzle - 0.4 mm For Printer P2S
Delivery between 8–13 Nov $9
Bambu Lab High Flow Hotend — H2D / H2S / H2C (left) / P2S / X2D — 0.4mm Hardened Steel
Delivery between 5–11 Nov $12.95
Bambu Lab H2D/H2S/P2S High Flow Hotend, 0.4mm [FAH063]
Delivery $15
| Flow Rate | 48 mm/s (PLA Matte) |
| Primary Function | Reducing print time, Enables significantly increased volumetric speed |
| Material | Hardened Steel (Nozzle) |
| Intended Use | Accelerate prints, Accelerate prints with optimized melt flow, Achieve crisp edges and flawless details |
| Solution For | Reducing print time |
